Anion "Grease Release" Degreasers
Anion Grease Release "(X) Factor"
Anion (X) factor is our strongest maintenance cleaning compound ideal for industrial cleaning. This super concentrate is formulated to melt-through the dirtiest and oiliest projects you can find. (X) factor is nonflammable, nonabrasive, non-corrosive, nontoxic and bio gradable. It is safe for ferrous and no ferrous metals and contains no phosphate’s, chlorinated hydrocarbons, sodium hydroxide or petroleum distillates, especially naphtha and benzene.
Anion Grease Release "Retaliate"
Advances in chemistry and technology means a “green cleaner” is no longer a weak cleaner. ANION "RETALIATE" is a powerful degreaser and is proven safe and effective. "RETALIATE" combines green emulsion surfactants and builders to handle even the toughest cleaning applications.
Kiln Bearing Equipment Varnish Cleaner
Varnish and carbon deposits throughout your equipment can cause many serious operational problems, resulting in excessively high maintenance costs.
ANION EVC can help reduce the problems caused by varnish and carbon. ANION EVC should be added to the existing lubricant to remove and suspend varnish while the equipment is running. Using ANION EVC eliminates the need for disassembling the equipment for cleaning. For maximum benefit, use ANION EVC before each Kiln Bearing lubricant change.
How to use EVCCleaning Hydrocarbon Deposits from Equipment
Initial Clean-Out Method: Add one gallon of EVC concentrate to each ten gallons of oil in the unit, first draining enough oil to allow adding the EVC. Continue to run the equipment for 20 to 40 hours, allowing the treated oil to disperse and suspend the varnish. To avoid redepositing the suspended contaminants, drain the oil while warm and replace filters. Refill with new oil.
Packing: EVC is available in cases (six gallons), five gallon pails or 55 gallon drums.